eBlocker factory reset

In some very rare cases it is necessary to preform a factory reset.

All you need is an USB stick. After the factory reset, you have to transfer your license to the eBlocker.

Please follow this steps:

  1. Add an empty file to your USB stick and name it „eblocker-factory-reset.txt".
  1. Disconnect the eBlocker from the power supply.
  2. Connect the USB stick to the eBlocker.
  3. Connect the power supply to the eBlocker.
  4. The factory reset will now be initiated. The eBlocker will automatically turn off after approximated 5 minutes (no LED activity).
  5. Disconnect the USB stick.
  6. Disconnect the power supply and connect it again after a few seconds.

Attention: After the factory reset you have to transfer your license: https://www.eblocker.com/de/license-transfer/

Is article helpful?